What should I do if the AEG KSE998290M Oven system cannot connect with the control panel (F908)?
If your AEG Oven displays error F908, indicating that the oven system cannot connect with the control panel, turn the oven off and on.
Why is my AEG KSE998290M Oven cleaning performance not satisfactory?
If the cleaning performance of your AEG Oven is not satisfactory, it might be because you started cleaning when the oven was too hot. Wait until the oven is cold and then repeat the cleaning process. Also, make sure you have removed all accessories from the oven before cleaning, and repeat the cleaning.
Why is there too much water on the bottom of the AEG KSE998290M cavity after cleaning?
If there's too much water on the bottom of the AEG Oven cavity after cleaning, it's likely because you put too much detergent in the oven before you started cleaning. Next time, evenly spread a thin layer of detergent on the cavity walls.
Why is there no water inside the grill or roasting pan of my AEG KSE998290M Oven after descaling?
If there is no water inside the grill or roasting pan after descaling your AEG Oven, it means that the water drawer was not filled to the maximum level. Check if a descaling agent or water is present in the water drawer body.
Why is there dirty water on the bottom of the AEG KSE998290M cavity after descaling?
If there is dirty water on the bottom of the cavity after descaling your AEG Oven, the grill or roasting pan is likely on the wrong shelf position. Remove the remaining water and descaling agent from the bottom of the oven. Next time, put the grill or roasting pan on the first shelf position.
Why is the water drawer of my AEG KSE998290M difficult to clean?
If the water drawer of your AEG Oven is difficult to clean, it may be because the lid and the wave breaker were not removed. Remove the lid and the wave breaker.
What to do if AEG KSE998290M Oven displays error F508 related to the Water drawer?
If your AEG Oven displays error F508, indicating that the water drawer does not work properly, turn the oven off and on.
What to do if AEG KSE998290M Oven displays error F131 related to steamer sensor temperature?
If your AEG Oven displays error F131, which indicates that the temperature of the steamer sensor is too high, turn the oven off and wait until it cools down, then turn it on again.
What to do if my AEG KSE998290M displays F602 or F603 error related to Wi-Fi?
If your AEG Oven displays error codes F602 or F603, indicating that Wi-Fi is not available, turn the oven off and on.
What to do if AEG Oven displays F604 error after the first Wi-Fi connection failed?
If your AEG Oven shows error F604 after the first Wi-Fi connection failed, turn the oven off and on, then try again.
To Next Page
General
