Delay start indicator.
The digital indicator can show:
• Reset position ( ).
• Programme duration (e. g. ).
• Delay time (e. g.
).
• Cycle end (
).
• Warning code (e.g.
).
• Error indicator ( ).
Time Save indicator.
Anti-stain indicator.
Extra Rinse indicator.
Steam phase indicator.
Add garments indicator. it lights at the beginning of the washing
phase, when it is still possible to pause the appliance and add
more laundry.
Child safety lock indicator.
Machine clean indicator. This is a recommendation to perform the
drum cleaning.
Anti-crease phase indicator.
7. DIAL AND BUTTONS
7.1 Introduction
The options/functions are
not available with all
washing programmes.
Check the compatibility
between options/functions
and washing programmes in
the "Programme Chart". An
option/function can exclude
another one, in this case the
appliance doesn't allow you
to set incompatible options/
functions.
7.2 On/Off
Press this button for a few seconds to
activate or deactivate the appliance. Two
different tunes sound while switching the
appliance on or off.
As the Stand-by function automatically
deactivates the appliance after several
minutes to reduce the energy
consumption, you may need to activate
the appliance again.
For more details, refer to Stand-by
paragraph in Daily Use chapter.
7.3 Programme dial
For selecting the desired washing
programme. Refer to 'Programmes'
chapter for more details.
The position
is a "Reset" function,
which stops and resets the running
programme. The display shows empty
www.aeg.com20
To Next Page
Loading...
Need help?
General
