EasyManua.ls Logo

AEG L8FBC69ASCA - Page 34

AEG L8FBC69ASCA
60 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
read the next paragraph 'Configuring
the appliance wireless connection'.
4. Start the application. Select the
country and language and login with
Your email and password. If you do
not have an account, create a new
one following the instructions in "My
AEG" .
5. Follow the instructions on the App for
the appliance registration and
configuration.
10.2 Configuring the washing
machine wireless connection
1. Press and hold the Zap./Vyp. button
for a few seconds to activate the
appliance. Wait about 10 seconds
before proceeding with wireless
configuration.
2. Press and hold the and the
buttons for a few seconds
simultaneously until a 'click' sounds.
Release the buttons. appears on
the display for 5 seconds and the
indicator starts blinking.
The wireless module begins starting up.
Make sure that you APP is
ready for connection.
3. After about 45 seconds,
(Access Point) appears on the
display.
The access point will be open for about 3
minutes.
As long as the appliance is
activated, it will keep trying
to connect with saved
credentials until the Wi-Fi is
deactivated or resets the
credentials.
4. Configure the "My AEG" app on your
smart device and follow the
instructions to connect the appliance
to your Wi-Fi network.
5. If the connectivity is configured, when
the programme information screen
returns, the indicator is on the
display.
Every time you switch the
appliance on, the appliance
takes 45 seconds to connect
to the network automatically.
When the indicator stops
blinking the connection is
ready.
To switch the wireless connection off,
press and hold the and the
buttons for a few seconds simultaneously
until the first acoustic signal:
appears on the display for 5 seconds.
If you switch the appliance
off and on again, the
wireless connection is
automatically off.
To remove the wireless credentials,
press and hold the and the
buttons for at least 10 seconds
simultaneously until the second acoustic
signal: appears on the display.
10.3 Remote Start
The Remote Start enables you to start a
cycle in remote control.
www.aeg.com34

Related product manuals