Option - Skip‐
ping phase
touch button
By touching this button you can set:
• Rinse Only at first touch. The washing programme starts from
the rinsing phase by skipping the washing phase.
All set options (except permanent extra rinse)
are deselected automatically.
• Spin Only at second touch. The appliance skips washing and
rinsing phase.
• Drain Only. at third touch. The appliance performs the draining
phase only.
At firth touch, the appliance proposes the de‐
fault setting of the washing programme again.
Start/Pause
touch button
Touch this button to start, pause the appliance or interrupt a run‐
ning programme.
Time Save
touch button
With this option you can decrease the programme duration:
• If your laundry is normally or lightly soiled, it may be advisable
to shorten the washing programme. Touch this button once to
decrease the duration.
• In case of smaller load, touch this button twice to set an extra
quick programme.
The display shows the indicator .
This option can also be used to shorten the
Steam programme duration.
ENGLISH 15
To Next Page
Loading...
