12. DAILY USE
WARNING!
Refer to Safety chapters.
12.1 Activating the appliance
1. Connect the mains plug to the mains
socket.
2. Open the water tap.
3. Press the On/Off button for a few
seconds to activate the appliance.
A short tune sounds (if activated). The
appliance automatically proposes a
default programme. The relevant
indicator illuminates.
The display shows the maximum load,
the default temperature, the default spin
speed, the indicators of the phases
making up the programme and the cycle
duration.
12.2 Loading the laundry
1. Open the appliance door.
2. Shake the items before you put them
in the appliance.
3. Put the laundry in the drum, one item
at a time.
Make sure not to put too much laundry in
the drum.
4. Close the door firmly.
CAUTION!
Make sure that no laundry
stays between the seal and
the door. There is a risk of
water leakage or damage to
the laundry.
CAUTION!
Washing heavily oiled,
greasy stains could cause
damage rubber parts of the
washing machine.
12.3 Filling the detergent and
additives
- Compartment for detergent pods
(Max 2 pods). When using detergent tab‐
lets, make sure that the Pods option is ac‐
tivated.
- Compartment for prewash phase
an soak programme (powder detergent
only).
- Compartment for washing phase
(powder detergent only).
Make sure that the Pods
option is deactivated when
using this compartment.
If using liquid detergent, re‐
member to insert the con‐
tainer for liquid detergent
.
- Compartment for fabric softener
and other liquid treatments (fabric condi‐
tioner, starch).
ENGLISH 25
To Next Page
Loading...
