•The time of delay
– When you set the delayed start the time of the programme end in-
creases by steps of 30 minutes till 10 hours and by steps of one
hour till 20 hours.
• The end of the programme
The display shows a zero.
E
This part comes on only if the door is open - Refer to 'Loading the laun-
dry'.
The programme maximum load
The weight of the laundry
The indicator bar fills accordingly to the laundry weight.
The indicator fully fills when you put the maximum load.
If you need to set a function
• An empty indicator bar comes on when the related function is availa-
ble with the set programme. If an indicator bar does not come on, it
means that it is not available.
• The function symbol comes on when the function is set.
• The indicator bar fills accordingly to the set function.
• If you make an incorrect selection the text bar on the display tells that the se-
lection is not possible.
F
Time save
The symbol comes on when you set the following functions:
Shortened duration
Extra quick
G
Extra rinsing
The indicator bar fills accordingly the numbers of rinses.
H
Stains
Prewash
Soak
The indicator bar fills accordingly to the set functions.
I
The default spin speed of the programme.
_ _ _
No spin
1)
10
To Next Page
