Need help?Do you have a question about the AEG LAVATHERM 56800 and is the answer not in the manual?
Check machine for damage before first use and note installation instructions.
Dryer is for domestic use only; avoid flammable solvents, rubber, and overloading.
Dispose of environmentally friendly packaging materials at local facilities.
Dispose of old appliance at designated recycling points to prevent environmental harm.
Diagram showing key components like water reservoir, filters, and loading door.
Overview of the control panel, programme selector, and maintenance displays.
Wipe drum with damp cloth or run a short cycle to remove residue.
Sort laundry by fabric type and care label; prepare items by closing zips and emptying pockets.
Turn on the machine, open the door, load laundry, and close securely.
Use the programme selector and option buttons for desired drying settings.
Configure audible signals and use Special Care/Sensitive for delicate or frequently-worn textiles.
Delay the start of a programme by 3, 6, or 9 hours using the DELAY TIMER button.
Reset programme to OFF and select a new one if a mistake was made.
Open door, add/remove laundry, close securely, and press START/PAUSE to resume.
END and CREASE GUARD displays light up; remove laundry after crease guard phase.
Clean micro-fine filter and fine strainer after every drying cycle for efficient operation.
Remove fluff from the entire filter area, using a vacuum cleaner if necessary.
Wipe the door seal with a damp cloth immediately after the drying cycle finishes.
Empty the water reservoir after each cycle; condensed water is not for consumption.
Clean the heat exchanger regularly to prevent damage and maintain efficiency.
Clean the drum with a damp cloth and vinegar solution; avoid abrasives.
Wipe the operating screen and housing with a damp cloth; do not use harsh cleaners.
Check common causes and reset the machine if an error display appears.
Solutions for issues like drying results, door closing, and programme errors.
Replace bulb with a special dryer bulb only; ensure lampcover is tightly secured.
Program the audible signal to remind you when the cycle is complete.
Adjust the 'level of dryness' detection for slightly drier or damper results.
Deactivate the EMPTY WATER display when using an external drain.
Details on dimensions, weight, loading volume, and energy consumption.
Energy consumption (kWh) for different programmes and loading volumes.
Follow safety rules for electrical connection, room conditions, and appliance placement.
Remove all transport safety devices before first use to avoid machine damage.
Connect the appliance to an earthed socket; follow wiring colour codes and fuse specifications.
Install a double pole switch for permanent connections, complying with regulations.
Door reversal should be performed by a specialist; disconnect power first.
Kits for stacking the dryer on top of a washing machine.
Kit for continuous draining of condensate into a basin or drain.
Standard guarantee covers defects due to faulty workmanship/materials within 12 months.
Excludes damage from transportation, misuse, neglect, and non-AEG parts.
Guarantee transfers within the EC/EFTA if product is installed and used domestically.
Contact Service Force by phone or website for repairs and spare parts.
Contact Customer Care for general questions about AEG-Electrolux appliances.
To Next Page
General