EasyManuals Logo

AEG LTR8E363C User Manual

AEG LTR8E363C
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
5.3 Water drainage
min.600 mm
max.1000 mm
The drain hose should stay at a height of no less than 600 mm and not more than 1000 mm.
You can extend the drain hose to maximum 4000 mm. Contact the authorised service centre for the
other drain hose and the extension.
5.4 Water-stop device
The inlet hose has a water stop device. This
device prevents water leaks in the hose
because of its natural ageing.
The red sector in the window «A» shows this
fault.
A
If this occurs, close the water tap and contact
the authorized service centre for information
on inlet hose replacement.
5.5 Electrical connection
At the end of installation you can connect the
mains plug to the mains socket.
The rating plate and the 'Technical Data'
chapter indicate the necessary electrical
ratings. Make sure that they are compatible
with the mains power supply.
Check that your domestic electrical
installation can take the maximum load
required, also taking into account any other
appliances in use.
Connect the appliance to an earthed
socket.
The power supply cable must be easily
accessible after installing the appliance.
10 ENGLISH

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AEG LTR8E363C and is the answer not in the manual?

AEG LTR8E363C Specifications

General IconGeneral
BrandAEG
ModelLTR8E363C
CategoryWasher
LanguageEnglish

Related product manuals