This option can also be used to shorten
the Pára programme duration.
8.5 Teplota
When you select a washing programme, the
appliance automatically proposes a default
temperature.
Set this option to change the default
temperature.
The indicator = cold water of the set
temperature comes on (the appliance does
not heat the water).
8.6 Odstřeďování
When you set a programme, the appliance
automatically selects the maximum spin
speed. The display shows only the spin
speeds available for the set programme.
Touch this button repeatedly to:
• Decrease the spin speed.
• Activate the Rinse Hold option .
The water of the last rinse is not drained
out to prevent the fabrics from creasing.
The washing programme ends with water
in the drum and the final spin phase is not
performed.
The display shows the indicator
.
The lid stays locked. The drum turns
regularly to reduce creasing. You must
drain the water to unlock the lid.
Touch Start/Pauza button: the appliance
performs the spinning phase and drains
the water.
• Activate the Extra Silent option.
All spinning phases (intermediate spin and
final spin) are suppressed and the
programme ends with water in the drum.
This helps to reduce creasing.
As the programme is very quiet, it is
suitable for use at night time when
cheaper electricity tariffs are available. In
some programmes the rinses are
performed with more water.
The display shows the indicator .
The lid stays locked. The drum turns
regularly to reduce creasing. You must
drain the water to unlock the lid.
Touch the Start/Pauza button: the
appliance performs only the draining
phase.
The appliance empties the water out
automatically after approximately 18
hours.
• Activate the Pouze vypouštění option
(Skipping the wash, rinse and spin
phases) .
The appliance performs the only draining
phase of the selected washing
programme.
The display shows the indicator
(cold), and the indicator (no spin)
and the indicator
.
• Activate the Pouze odstřeďování
option (Skipping the wash and rinse
phases) .
The appliance performs only the spinning
phase of the selected washing
programme.
The display shows the indicator
(cold), the phase indicator the spin speed.
If it is necessary to reduce the spin
speed, select a programme with a
lower spin speed as default.
8.7 Skvrny/Předpírka
Press this button repeatedly to activate one of
the two options.
• Skvrny
Select this option to add an anti-stain
phase to a programme in order to treat
heavily soiled or stained laundry with stain
remover.
Pour the stain remover into compartment
. The stain remover will be added in
the appropriate phase of the washing
programme.
This option can increase the
programme duration and is not
available with a temperature lower
than 40 °C.
18 ENGLISH
To Next Page
Loading...
Need help?
General
