Compartment for liquid additives (fabric
conditioner, starch).
The mark
is the maximum level for the
quantity liquid additives.
Flap for powder or liquid detergent.
11.4 Liquid or powder detergent
• Position A for powder detergent (factory
setting).
• Position B for liquid detergent.
When you use the liquid detergent:
• Do not use gelatinous or thick liquid
detergents.
• Do not put more liquid then the
maximum level.
• Do not set the delay start function.
11.5 Setting a programme
1. Turn the programme knob. The related
programme indicator comes on.
The indicator of button Start/Pauza flashes
with red colour.
The display shows the default temperature,
the spin speed and the empty indicator bars
of the available functions.
2. To change the temperature and/or the
spin speed, press the related buttons.
3. Set the available functions.
11.6 Starting a programme without
the delay start
Press button Start/Pauza to start the
programme.
The relevant indicator stops to flash and
stays on.
On the display the indicator of the phase is
operation starts to flash.
The programme starts, the lid is locked. The
display show the indicator .
The drain pump can operate for a short
time when the appliance fills water.
ENGLISH 23
To Next Page
Loading...
Need help?
General
