EasyManuals Logo

AEG LTR8E363C User Manual

AEG LTR8E363C
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #29 background imageLoading...
Page #29 background image
needed, using ammonia cream cleanser
agent without scratching the seal surface.
Always obey the instructions that you find
on the packaging of the product.
13.7 Cleaning the drum
Regularly examine the drum to prevent rust
particles.
For a complete cleaning:
1. Clean the drum with special products for
stainless steel.
Always follow the instructions that you
find on the packaging of the product.
2. Run a short cotton programme at high
temperature or use if is available
programme Čištění pračky. Add a small
quantity of powder detergent into empty
drum, in order to rinse out any left
residues.
13.8 Cleaning the detergent dispenser
1 2 3
13.9 Cleaning the drain filter
Regularly check the drain pump filter and
make sure that it is clean.
Clean the drain pump if:
The appliance does not drain the water.
The drum does not turn.
The appliance makes an unusual noise
because of the blockage of the drain
pump.
The display shows the alarm code
WARNING!
Disconnect the mains plug from the
mains socket.
Do not clean the pump if the water in
the appliance is hot. Wait until the
water cools down .
Do not remove the filter while the
appliance operates.
Unscrew the filter slowly and gently
until the water stops flowing out. After
water has been drained, filter can be
unscrewed fully.
Always keep a rag nearby to dry up any
water spillages when removing the filter.
ENGLISH 29

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AEG LTR8E363C and is the answer not in the manual?

AEG LTR8E363C Specifications

General IconGeneral
BrandAEG
ModelLTR8E363C
CategoryWasher
LanguageEnglish

Related product manuals