EasyManua.ls Logo

AEG LWG88416BI - User Manual

AEG LWG88416BI
60 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
aeg.com/register
LWG88416BI
EN User Manual | Washer Dryer
aeg.com\register

Table of Contents

Questions and Answers

  • S
    Summer KeyAug 13, 2025
    Why is my AEG LWG88416BI not draining water?
    • G
      Gregory ZamoraAug 13, 2025
      If your AEG Washer/Dryer isn't draining, several factors could be at play. First, check the drain hose for any kinks or bends that might be obstructing the flow. Next, ensure the drain filter isn't clogged; clean it if necessary. Also, verify that the drain hose is correctly connected. Finally, make sure you've set the drain program, especially if you selected a program without a drain phase or an option that leaves water in the tub.
  • D
    Dana ShawAug 17, 2025
    What to do if the AEG LWG88416BI Washer/Dryer programme does not start?
    • A
      Aaron AcostaAug 17, 2025
      If the program on your AEG Washer/Dryer isn't starting, make sure the appliance is properly connected to the mains socket and that the door is fully closed. Check the fuse box for any damaged fuses. Ensure you've touched the Start/Pause button. If the delay start is set, either cancel it or wait for the countdown. Deactivate the Child Lock if it's enabled. Verify the knob is correctly positioned on your selected program and that the drain hose is correctly positioned and not too low.
  • P
    ptaylorAug 20, 2025
    How to fix AEG Washer/Dryer that does not fill with water properly?
    • B
      Brittany MacdonaldAug 20, 2025
      If your AEG Washer/Dryer isn't filling with water properly, start by ensuring the water tap is fully open. Check that the water supply pressure isn't too low. Make sure the water tap isn't clogged. Inspect the inlet hose for kinks, damages, or bends, and ensure it's correctly connected. Also, verify that the filters of the inlet hose and valve are not clogged. Finally, check the sink spigot to ensure it's not clogged.
  • A
    Andrea JeffersonAug 25, 2025
    Why are the washing results not satisfactory with my AEG Washer/Dryer?
    • T
      theresaparkerAug 25, 2025
      If you're not satisfied with your AEG Washer/Dryer's washing results, make sure you're using the correct detergent in the correct quantity. Ensure that the washing program is fully finished and that you've set the correct temperature for the load.
  • C
    Cynthia EllisAug 28, 2025
    What if the AEG LWG88416BI door is open or not closed correctly?
    • I
      ifreemanAug 28, 2025
      Make sure that the door is properly closed.
  • J
    jennifer36Sep 1, 2025
    Why does my AEG LWG88416BI Washer/Dryer make unusual noise and vibrate?
    • C
      Claire LarsenSep 1, 2025
      If your AEG Washer/Dryer is making unusual noises and vibrating, ensure the appliance is correctly leveled. Also, make sure that the packaging and/or the transit bolts have been removed.
  • J
    Jessica MaloneSep 4, 2025
    What to do if the mains supply is unstable for AEG Washer/Dryer?
    • E
      Ethan BellSep 4, 2025
      If the mains supply is unstable, wait until it stabilizes.
  • L
    Lisa HuffSep 8, 2025
    Why are there detergent residues in the dispenser drawer of my AEG LWG88416BI Washer/Dryer after the washing cycle?
    • A
      Amanda GonzalesSep 8, 2025
      If you find detergent residues in the dispenser drawer of your AEG Washer/Dryer after a washing cycle, ensure you've used the detergent dispenser according to the user manual's instructions.

AEG LWG88416BI Specifications

General IconGeneral
Appliance placementBuilt-in
Built-in displayYes
Control typeElectronic
Door hingeLeft
Washing capacity8 kg
Spin-drying classB
Spin speed1400 rpm
Washing classA
Drying capacity5 kg
Drying classB
Delay startYes
Energy efficiency class (washing)A
Width60 cm
Noise Level (Drying)60 dB
ColorWhite
Loading typeFront loading
ProgrammesWool
ProgramsCotton program
DisplayLCD

Related product manuals