2. Remove the cardboard top. Remove the
polystyrene packaging materials.
3. Remove the internal film.
4. Open the door. Remove the polystyrene
piece from the door seal and all the items
from the drum.
5. Put one of the polystyrene packaging
elements on the floor behind the
appliance. Carefully put down the
appliance with the rear side on it. Make
sure not to damage the hoses.
6. Remove the polystyrene protection from
the bottom. Pull up the appliance in
vertical position.
7. Remove the power supply cable and the
drain hose from the hose holders.
8. Remove the three bolts. Use the key
supplied with the appliance. Pull out the
plastic spacers.
ENGLISH 9
To Next Page
