AEG MBB1756SEM User Manual

8
www.aeg.comwww.aeg.com
2.2 Installing the appliance
1. Remove all packaging and check
carefully for any signs of damage.
2. This oven is designed to fit into a
350 mm high cupboard as standard.
When fitting into a 360 mm high
cupboard:- Unscrew and remove the
4 feet from the bottom of the oven.
Rotate the feet 90 degrees and refit with
the long side to the front of the oven.
3. Fit the fixing hook to the right hand side
of the kitchen cupboard using the
instruction sheet supplied.
4. Fit the appliance into the kitchen
cupboard slowly, and without force. The
appliance should be lifted onto the fixing
hook and then lowered into place. Fix the
oven on the left hand side using the two
screws provided.
5. Ensure the appliance is stable and not
leaning. Ensure that a 2.5 mm gap is
kept between the cupboard door above
and the top of the frame (see diagram).
2.5 mm
2.5 mm
4 mm
4 mm
1_AEG_EN240_CS_BASE_AL28UICTO_SAFETYMAY19_Layout 1 14/09/2018 08:51 Page 8

AEG MBB1756SEM Specifications

General

Turntable	Yes
Clock type	Electronic
Door color	Black
Cord length	1.4 m
Control type	Touch
Display type	LED
Product type	Solo microwave
Product color	Black, Stainless steel
Turntable size	272 mm
Microwave power	800 W
Appliance placement	Built-in
Inverter technology	-
Number of power levels	5
Grill	No
Number of cooking programs	3
Bulb power	25 W
Current	10 A
Connected load	1250 W
AC input voltage	220 - 240 V
Package weight	18500 g

Weight and Dimensions

Depth	316 mm
Width	594 mm
Height	371 mm
Weight	15500 g
Installation compartment depth	300 mm
Installation compartment width	562 mm
Installation compartment height	360 mm