20
Modes of operation
How to set
The Quick-Start button
‘START/QUICK’
provides full microwave power
from 30 seconds up to 2 minutes and 30 seconds, by 30 second-
intervals. Each time you push the Quick-START button
‘START/QUICK’
the programme time is increased by 30 seconds.
Example : heating a cup of water (1 min. 30 sec.)
1. Press the START-button
‘START/QUICK’
three times. The
time appears in the display and
the programme begins. The
microwave power signal lamp
comes on.
01:30
2. You may increase the time by
30 second-intervals while the
programme is running up to a
limit of 2 minutes and 30
seconds by pressing the START
button
‘START/QUICK’
.
You cannot use Quick-START for programmes exceeding 2 minutes
and 30 seconds.
QUICK-Start
0
3
To Next Page
Loading...
