EasyManua.ls Logo

AEG PE-8038M - Standby Mode; Accessories

AEG PE-8038M
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
STAND-BY MODE
Once powered and inserted into the cabinet, the machine is in stand-by mode:
this will be signaled by the on/off LED blinking.
Keep the on/off button pressed as it is shown in the figure.
As soon as the machine is ready to operate, the LED will be kept on as it is
shown in the figure. Repeat the operation to enable the STAND-BY mode again.
5. ACCESSORIES
This espresso machine is equipped with a filter holder that can receive two
filters, that is:
- for one cup
- for two cups.
When using a paper pod, put it in the filter for one cup.
There is also a measuring spoon that can determine the right quantity of ground
coffee exactly (approximately 7.2 g).
This machine is also equipped with two nozzles: a nozzle is used to deliver one
cup of coffee, whereas the other nozzle can serve two cups of coffee and it is
provided with adjusting screw; these nozzles will alternately be screwed onto
the filter holder according to the needs.
Downloaded from CoffeeMachineManual.com Manuals

Related product manuals