EN -24-
ERROR TYPE MEANING WHY WHAT TO DO
E09
Freezer
compartment is not
cold enough
Likely to occur after
long term power failure.
1. Set the freezer temperature
to a colder value or set Super
Freeze. This should remove the
error code once the required
temperature has been reached.
Keep doors closed to improve
time taken to reach the correct
temperature.
2. Remove any products which
have thawed/defrosted during
this error. They can be used
within a short period of time.
3. Do not add any fresh produce
to the freezer compartment until
the correct temperature has
been reached and the error is
no longer.
If this warning continues an
authorised technician needs to be
contacted.
E10
Fridge
compartment is not
cold enough
Likely to occur after:
- Long term power
failure.
- Hot food has been left
in the fridge.
1. Set the fridge temperature to
a colder value or set Super
Cool. This should remove the
error code once the required
temperature has been reached.
Keep doors closed to improve
time taken to reach the correct
temperature.
2. Please empty the location
at the front area of air duct
channel holes and avoid putting
food close to the sensor.
If this warning continues an
authorised technician needs to be
contacted.
E11
Fridge
compartment is too
cold
Various
1. Check is Super Cool mode is
activated
2. Reduce the fridge compartment
temperature
3. Check to see if vents are clear
and not clogged
If this warning continues an
authorised technician needs to be
contacted.
To Next Page
Loading...
Need help?
General
