EN -35-
TECHNICAL DATA PART - 8.
The technical information is situated in the rating plate on the internal side of the appliance
and on the energy label.
The QR code on the energy label supplied with the appliance provides a web link to the
information related to the performance of the appliance.
Keep the energy label for reference together with the user manual and all other documents
provided with this appliance.
INFORMATION FOR TEST INSTITUTES PART - 9.
Installation and preparation of the appliance for any EcoDesign verification shall be compliant
with BS EN 62552. Ventilation requirements, recess dimensions and minimum rear clearances
shall be as stated in this User Manual at PART 1. Please contact the manufacturer for any
other further information, including loading plans.
To Next Page
Loading...
Need help?
General
