3.7 Installation of a door
handle
If there is a door handle separately
provided in a bag, you can install it as
follows:
1. Remove the screws from the holes
on the side of the door. Keep or
install the screw covers on the side
with a door hinge.
2. Match the handle holes with the
holes in the door and screw the
handle with screws previously
removed.
4. OPERATION
4.1 Control panel
1. Temperature indicator
2. Super Freeze indicator
3. Control button
4.2 Switching on
Insert the plug into the wall socket.
4.3 Switching off
To turn off the appliance, remove the
plug from the power socket.
4.4 Temperature regulation
To set the temperature, press the control
button repeatedly until you reach the
desired temperature.
Recommended set temperature is:
• +4°C for the fridge,
The temperature range may vary
between 2°C and 8°C for fridge.
Choose the setting keeping in mind that
the temperature inside the appliance
depends on:
• room temperature,
• frequency of opening the door,
• quantity of food stored,
• appliance location.
The temperature indicators show the set
temperature.
The set temperature will be
reached within 24 hours.
After a power failure it
remains stored.
4.5 Super Freeze function
The Super Freeze is used to perform
pre-freezing and fast freezing in
sequence of Freezer compartment. This
function accelerates the freezing of fresh
food and, at the same time, protects
foodstuffs already stored from
undesirable warming.
ENGLISH 11
To Next Page
Loading...
