AEG SANTO - Grid Preparation; Reversing the Door

Grid preparation
t
When changing the side at which the door opens, remove plug from
the mains.
Left door opening:
☞
Remove the left side (A) of the grid cutting
it from the rear (see figure)
Right door opening:
☞
Remove the right side (B) of the grid cutting
it from the rear (see figure)
Re-install the grid to the base of the appli-
ance by pushing on to the clasps (a) until
they click.
To reverse the opening direc-
tion of the door, proceed as
shown in the figures:
29
a
a
DO002/2
A
B
Reversing the door
The side at which the door opens can be changed from the right side
(as supplied) to the left side, if the installation site requires.
1
1
2
3
4
5