This document is a user manual for the AEG SKB582F1AF Refrigerator. It provides comprehensive information on safety, installation, operation, maintenance, troubleshooting, and technical specifications of the appliance.
Function Description
The AEG SKB582F1AF is a refrigerator designed for household and similar applications. Its primary function is to store fresh food and beverages, maintaining them at a suitable temperature to preserve freshness and aroma. The appliance is not suitable for freezing foodstuffs. It features an automatic defrosting system for the refrigerator compartment, where defrost water drains into a special container at the back of the appliance and evaporates.
Important Technical Specifications
- Model: SKB582F1AF
- Type: Refrigerator
- Refrigerant: Isobutane (R600a), a natural gas with high environmental compatibility.
- Ambient Temperature Range: Intended for use at ambient temperatures ranging from 10°C to 38°C.
- Electrical Connection:
- The appliance must be earthed.
- Supplied with a 13 amp fuse (B). A 13 amp ASTA approved (BS 1362) fuse must be used for replacement.
- Mains lead wire colours: Green and yellow for Earth, Blue for Neutral, Brown for Live.
- Dimensions (Overall dimensions without handle and feet):
- Height (H1): 819 mm
- Width (W1): 596 mm
- Depth (D1): 547 mm
- Space required in use (including handle and space for air circulation):
- Height (H2): 820 mm
- Width (W2): 596 mm
- Depth (D2): 550 mm
- Overall space required in use (including handle, space for air circulation, and minimum door opening angle):
- Height (H2): 820 mm
- Width (W3): 777 mm
- Depth (D3): 1120 mm
- Internal Lighting: Equipped with a long-life LED interior light. Only LED bulbs (E14 base) with the maximum power shown on the lamp unit should be used for replacement.
- Spare Parts Availability: Thermostats, temperature sensors, printed circuit boards, light sources, door handles, door hinges, trays, and baskets will be available for 7 years after the model has been discontinued. Door gaskets will be available for 10 years.
Usage Features
- Temperature Regulation: The temperature is regulated automatically but can be adjusted by the user. A medium setting is generally recommended. The temperature regulator can be turned clockwise for a lower temperature and counterclockwise for a higher temperature.
- Door Shelves: The door shelves are adjustable, allowing users to reposition them at different heights to accommodate various food package sizes.
- Movable Shelves: The refrigerator walls are equipped with runners, enabling flexible positioning of the shelves.
- Variable Storage Box: This model includes a variable storage box that can be moved sideways.
- Food Storage Recommendations:
- Cover food with packaging to preserve freshness and aroma.
- Use closed containers for liquids and food to prevent flavour or odour transfer.
- Separate cooked and raw food to avoid cross-contamination.
- Defrost food inside the fridge.
- Allow hot food to cool to room temperature before placing it in the appliance.
- Place new stock behind old stock to prevent food waste.
- Specific recommendations for meat, fruit, vegetables, butter, cheese, and bottles are provided.
- Energy Saving Tips:
- Ensure drawers are in the bottom part and shelves are evenly distributed for efficient energy use.
- Avoid frequent or prolonged door openings.
- Do not set the temperature too high unless required by food characteristics.
- If ambient temperature is high and the appliance is fully loaded, adjust temperature control towards higher settings to allow automatic defrosting and save energy.
- Ensure good ventilation and do not cover ventilation grilles or holes.
Maintenance Features
- Interior Cleaning: Before first use and regularly thereafter, clean the interior and all internal accessories with lukewarm water and a neutral soap, then rinse and dry thoroughly.
- Door Seals: Regularly check and wipe door seals clean to ensure they are free from debris.
- Defrost Water Drain Hole: Periodically clean the defrost water drain hole, located under the salad drawers, using the provided tube cleaner to prevent water overflow.
- Air Channels Cleaning:
- Remove the plinth (A) and ventilation grid (B).
- Clean the ventilation grid.
- Carefully pull out the air deflector (C), ensuring no water is left from defrosting.
- Clean the lower part of the appliance with a vacuum cleaner.
- Period of Non-Operation: For long periods of non-use, disconnect the appliance, remove all food, clean the appliance and accessories, and leave the door open to prevent unpleasant smells.
- Lamp Replacement:
- Disconnect the plug from the mains socket.
- Remove the screw from the lamp cover.
- Detach the lamp cover.
- Replace the bulb with an identical LED bulb (E14 base) designed for household appliances.
- Reassemble the lamp cover and tighten the screw.
- Reconnect the plug and verify the light switches on.
- Closing the Door:
- Clean the door gaskets.
- Adjust the door if necessary (refer to installation instructions).
- Replace defective door gaskets if necessary (contact Authorised Service Centre).
- Safety during Maintenance: Before any operations (e.g., reversing the door), remove the plug from the power socket. Only qualified persons should perform maintenance and recharging of the cooling unit, as it contains hydrocarbons.
- Cleaning Agents: Do not use detergents, abrasive powders, chlorine, or oil-based cleaners as they can damage the finish. Accessories are not suitable for washing in a dishwasher.
Need help?
General
To Next Page
