Program Spun at / residual humidity
Drying time
1)
Energy
consump‐
tion
2)
seco armario/
guardar
1200 rpm / 40% 66 min 0,68 kWh
800 rpm / 50% 80 min 0,85 kWh
1)
For partial loads, the cycle time is shorter and appliance uses less energy.
2)
Improper ambient temperature and/or poorly centrifuged laundry can prolong cycle time and increase
the energy consumption.
6. OPTIONS
6.1 Anti-arrugas/Rugas
Extends up to 120 minutes the anti-
crease phase (30 minutes) at the end of
the drying cycle. After drying phase drum
rotates from time to time to prevent
creases. Laundry can be removed during
the anti-crease phase.
6.2 Alarm.
The sound is heard at the:
• cycle end
• start and end of crease guard phase
The buzzer option is by default always
on. You can use this option to activate or
deactivate the sound.
6.3 Tiempo/Tempo sec.
This option is applicable only to the
Tiempo/Tempo sec. programme. You
can set the programme duration, from a
minimum of 10 minutes to a maximum of
2 hours. The setting of the duration is
related to the quantity of laundry in the
appliance.
The cycle lasts as long as
set drying time regardless of
the size of a load and its
dryness.
TIME DRYING RECOMMENDATION
up 10
min
action of cool air only (no heat‐
er).
10 - 40
min
additional drying to improve dry‐
ness after previous drying cy‐
cle.
> 40
min
full drying of the small laundry
loads up to 4 kg, well spun
(>1200 rpm).
6.4 Inicio Diferido
Lets to delay the start of a
drying program from
minimum of 30 minutes to
maximum of 20 hours.
1. Set the drying program and options.
2. Touch Inicio Diferido button again
and again.
Time of delay is on the display (e.g.
if the program has to start after 12
hours.)
3. To activate Inicio Diferido option,
touch the Inicio/Pausa button.
Time to start decreases on the display.
ENGLISH 13
To Next Page
Loading...
