EasyManua.ls Logo

AEI Security & Communications 3400 User Manual

Default Icon
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Wireless Alarm system
Model 3400
Installation & Operation Manual

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the AEI Security & Communications 3400 and is the answer not in the manual?

AEI Security & Communications 3400 Specifications

General IconGeneral
BrandAEI Security & Communications
Model3400
CategorySecurity System
LanguageEnglish

Summary

Illustration & Description

Control Panel Components

Details KEYPAD, PANIC, HOME, ARM, DISARM buttons, PWR/ARM LED, LOW BAT. LED, ZONE LEDs, Rx LED, BUILT-IN SIREN, FUSE, TAMPER SWITCH, BATTERY COMPARTMENT, AC JACK, CABLE ROUTE, WALL SLOTS.

Installing & Preparing the System for Use

Site Code and Zone Configuration

Instructions for setting Site Code via DIP switches and configuring detector zones.

Operation the System

Arming and Disarming via Keypad

Procedures for arming, disarming, and arming in Home mode using the keypad.

Programming the System Memory

Keypad Security Code and Siren Duration

Changing the keypad code and setting the siren alarm duration.

Entry/Exit Time and Global Reset

Testing

Detector and Siren Testing

Problem Solving and Fault Finding

Tamper Switch and Detector Issues

Code Loss and Power Failure Recovery

Steps for recovery if keypad code is forgotten or mains power fails.