To Next PageTo Next PageWhat to do if my Aennon Humidifier is leaking water?
If your Aennon Humidifier is leaking water, the water tank or filter cap might be loose; please tighten them. Alternatively, the water tank may not be inserted correctly; reinsert it properly.
Why is my Aennon Humidifier not working?
Your Aennon Humidifier might not be working due to several reasons. Ensure that the water tank is adequately filled. Also, check that the humidifier is placed on a level horizontal surface and that the tank is correctly installed. Make sure the variable control knob is on the correct setting. Verify there is no dust or mineral build-up on the oscillator and that the float is functioning properly. Finally, if no vapor is produced, ensure the oscillator is not damaged.
How to fix bad smell from Aennon 1.3L vapor?
If the vapor from your Aennon Humidifier smells, the humidifier bowl and oscillator may be dirty; clean them as per instructions. Also, change the old water and replace it with fresh, clean water.
General| Brand | Aennon |
|---|---|
| Model | 1.3L |
| Category | Humidifier |
| Language | English |
Lists key characteristics of the cool mist humidifier, including its LED light and aroma diffusion.
Guide on cleaning the oscillator using a soft toothbrush and water.
Steps for cleaning the water tank using diluted vinegar solution.
Checks for disconnected power cord and proper connection to the main supply.
Troubleshoots issues like low water, incorrect placement, or oscillator damage.
Addresses issues with water level, control knob setting, oscillator build-up, or float function.
Recommends cleaning the bowl/oscillator and using fresh water.
Suggests checking for loose tank/cap or incorrect tank insertion.
