aeno.com/documents 11
4. The filter change LED is blinking after the filter was replaced or cleaned. Click
on the Filter button to restart the filter replacement timer, and the LED
indicator will be turned off.
ATTENTION! If your problem persists, please contact your local supplier or the
service center for support. Please do not disassemble the device or try to repair
it on your own.
Recycling information
These symbols indicate that you must follow the Waste
Electrical and Electronic Equipment (WEEE) and Waste
Battery and Battery Regulations when disposing of the device,
its batteries and accumulators, and its electrical and electronic
accessories. According to the rules, this equipment must be
disposed of separately at the end of its service life.
Do not dispose of the device, its batteries and accumulators,
or its electrical and electronic accessories together with
unsorted municipal waste, as this will harm the environment.
To dispose of this equipment, it must be returned to the point of sale or turned
in to a local recycling facility.
You should contact your local household waste disposal service for details.
The warranty period and service life shall be 2 years as from the date of
purchase of the device.
ASBISc reserves the right to modify the device and to make edits and changes to this document
without prior notice to users.
The warranty period and service life shall be 2 years as from the date of purchase of the device.
Manufacturer: ASBISc Enterprises PLC, 43 Kolonakiou Street, Diamond Court, Ayios Athanasios,
4103 Limassol, Cyprus. Made in China. For current information and details on the device description
and specification, as well as connection process, certificates, warranty and quality issues, see
relevant Installation and Operation Manuals available for downloading at aeno.com/documents.
All trademarks and names herein are the property of their respective owners.
To Next Page
Loading...