8 aeno.com/documents
Do not use a device that is damaged or has previously fallen into water. If the
garment steamer has been transported or stored at low temperatures, leave it
for 2 hours at room temperature before use. Make sure that the rated voltage
and frequency indicated in the technical specifications correspond to the
parameters of the electricity supply. Handle the device with dry hands only. Do
not leave the garment steamer unattended while it is plugged in. Unplug the
garment steamer after use and before cleaning. Disconnect the device from
the electricity supply by grasping the plug, not the power cord. Make sure that
the power cord does not get twisted, bent or pressed by anything, and does
not come into contact with hot objects or heat sources. Check the care
information on the product label before using the garment steamer. Do not
touch the hot surface of the steamer head. Do not steam clothes on humans
or animals. Do not point a jet of steam at people or animals, as well as objects
that could be damaged by the hot steam. Do not use chemical and harsh
detergents, abrasive pastes, products containing acids and solvents, or metal
sponges to clean the device. Detailed information can be found in the full user
manual available at aeno.com/documents.
Statuses of the Power Indicator
The device is not plugged in
Blue indicator is flashing
The device is plugged in, but is not turned on
Blue indicator is lit steadily
The device is plugged in and switched on
Statuses of the Operating Mode Indicators
indicators
off
The device is not plugged in
flashing
The device is turned on, heating in progress
steadily
Heating is complete, you can start steaming.
Minimum operating mode is selected
To Next Page
Loading...