Screw (included)
1.
2. Insert window panel extension (O) into the
window panel (P). Lightly tighten the
preassembled screws in the window panel (P)
to hold the extension (O) in place.
3. Pull a small section of both ends of exhaust
hose (M) out and attach exhaust nozzle connector
(L) and window panel nozzle (N) to the exhaust
hose (M).
4.
window panel (P).
Attach the window panel nozzle (N) to the
Important:
The window panel is designed to fit windows
between 28.3 in. and 55.1 in. only. Sometimes,
it may be necessary to cut the window panel
extension (O) according to the width of your
window.
Important:
Not for use with casement windows.
To Next Page
Loading...
Need help?
General
