AEONS Technologies Signature Series User Manual

Signature Series Wall-Mounted Enclosure
Models: 6U, 9U, 12U, 15U, 18U, 22U
Owner’s Manual
Rev. 2.2
Applied to Model Series: SAxx06, SAxx09, SAxx12, SAxx15, SAxx18, SAxx22,
www.aeonstech.com
support@aeonstech.com
Keep the enclosure in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and gasses, conductive
contaminants, dust, and direct sunlight. Leave adequate space at the front and rear of the enclosure for proper ventilation. Do not block, cover
or insert objects into the external ventilation openings of the enclosure.
The enclosure is extremely heavy. Use caution when handling the enclosure. Do not attempt to unpack, move or install it unassisted. Use a
mechanical device such as a forklift or pallet jack to move the enclosure in the shipping container. Inspect the shipping container and the
enclosure for shipping damage. Do not use the enclosure if it is damaged. Leave the enclosure in the shipping container until it has been moved
as close to the final installation location as possible.
Use caution when cutting packing materials. The enclosure may be scratched, causing damage not covered by the warranty. Save all packing
materials for later use. Repacking and shipping the enclosure without the original packing materials may cause product damage that will void the
warranty.
Install the enclosure in a structurally sound area capable of handling the load, or on a level floor that is able to bear the weight of the enclosure,
all equipment that will be installed in the enclosure and any other enclosures and/or equipment that will be installed nearby. For permanent
wall mounting, be sure to securely fasten the enclosure to the building structure before operation. Do not place any object on the enclosure,
especially containers of liquid, and do not attempt to stack the enclosures.
Important Safety Instructions
This manual contains instructions and warnings that must be followed during the installation and operation of the product
described in this manual. Failure to comply may invalidate the warranty and cause property damage or personal injury.
Overview
Thank you for purchasing the AEONS enclosure product.
The AEONS signature series enclosures accommodate all standard 19-inch rackmount equipment. They feature premier quality, heavy-duty
cabinets in various U sizes for quick and easy deployment.
Our enclosures include quick-release doors and side panels for convenient maintenance. Front access doors are reversible for installation
flexibility. Front door and side panels are lockable. An optional rolling caster kit (optional for 15U-22U) is available for easy maneuvering of
enclosures.

AEONS Technologies Signature Series Specifications

General

Brand	AEONS Technologies
Model	Signature Series
Category	Enclosure
Language	English

Summary

Signature Series Wall-Mounted Enclosure

Important Safety Instructions

Manual contains instructions and warnings for installation and operation. Failure to comply may invalidate warranty.

Overview

Details about AEONS signature series enclosures, accommodating 19-inch rackmount equipment and features.

Parts Identification

Accessories List

Lists all included accessories such as screws, nuts, washers, locks, keys, and optional casters for the enclosure.

Assembly Steps

Install Bottom Panel and Frames

Step 1: Lay down bottom panel and insert front/rear frames. Attach with screws and nuts.

Install Top Panel and Frames

Step 2: Place top panel and insert into top. Attach with screws and nuts.

Install Vertical Mounting Rails

Step 3: Install 4 vertical rack rails to horizontal rails at desired depth using cage nut kit.

Install L Type Mounting Bracket

Step 4: Mount L brackets to vertical mounting rails on each side using cage nut kit.

Install Side Panel

Step 5: Install two side panels using side panel latches and test locks.

Install Front Door Lock

Step 6: Install the front door lock to the front door as shown.

Install Front Door

Step 7: Attach front door to cabinet by inserting pins into hinge holes.

Install Back Panel

Step 8: Attach the back panel to the cabinet using M4 screws.

Install Hanger Bar

Step 9: Attach hanger bar to wall or mounting surface using anchors.

Mount the Enclosure

Step 10: Fit cabinet mounting notches onto hanger bar hooks and secure with screws.

Install Casters

Step 11: Attach casters to bottom panel using self tapping screws (Optional for 15U-22U).

Technical Support and Liability

Technical Support

Information on AEONS lifetime technical support and how to contact for assistance.

Limitations of Liability

Disclaimers regarding anchoring, installation, and product use, and AEONS's responsibility.

Use of Trademarks and Protected Names

Statement on the use of third-party trademarks and acknowledgement of their ownership.