EasyManua.ls Logo

Aeotec Range Extender 7 User Manual

Aeotec Range Extender 7
6 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Aeotec Range Extender 7.
Aeotec Range Extender 7 was developed to amplify Z-Wave and Z-Wave Plus signals. It is powered by
Aeotec’s Gen7 technology.
Important safety information.
Please read this and other device guides carefully. Failure to follow the recommendations set forth by Aeotec
Limited may be dangerous or cause a violation of the law. The manufacturer, importer, distributor, and/or
reseller will not be held responsible for any loss or damage resulting from not following any instructions in this
guide or in other materials.
Keep product away from open flames and extreme heat. Avoid direct sunlight or heat exposure.
Range Extender 7 is intended for indoor use in dry locations only. Do not use in damp, moist, and/or wet
locations.
Question and Answer IconNeed help?

Do you have a question about the Aeotec Range Extender 7 and is the answer not in the manual?

Aeotec Range Extender 7 Specifications

General IconGeneral
BrandAeotec
ModelRange Extender 7
CategoryExtender
LanguageEnglish

Summary

Important safety information

General Safety Precautions

Keep away from heat, flames, direct sunlight. Use indoors in dry locations only.

Quick Start Guide

Adding to Z-Wave Network

Steps to integrate the Range Extender into your Z-Wave network.

SmartStart Inclusion

Method for inclusion using QR code if gateway supports SmartStart.

Classic Inclusion

Method for inclusion using the action button and controller pairing.

General LED Status

LED Indicators

Describes LED states when unpaired and paired to a network.

Advanced Functions

Removing from Z-Wave Network

Procedure to remove the Range Extender from your Z-Wave network.

LED Control

How to turn the device's LED on or off using the action button.

Testing Health Connectivity

Test communication health with gateway via button press and LED feedback.

Manual Factory Reset

Instructions for resetting the device to factory defaults.

Technical Specifications

Product Details

Name, model, dimensions, weight, SmartStart, Repeater, Beaming, Security.

Performance Specs

Power consumption, operating temperature, humidity, and distance.

Certifications and Input

Certifications, IP rating, and AC input specifications.

Plug Specifications

Safety Certifications

Market-specific safety certifications (FCC, RCM, CE).

Plug Types

Details on plug types for USA, Europe, Australia, and UK.