AERF WIRELESSBAND 1.3 SLIM User Manual

Instruction Manual
(WIRELESSBAND 1.3)
1. GENERAL
2. TRANSMITTER TYPICAL CONFIGURATIONS
1 2 3
1 2 3
1 2 3
TRANSMITTER 1
TRANSMITTER 1
TRANSMITTER 2
Input 1
Common
Input 2
Input 1
Common
Input 2
Input 1
Common
Input 2
Resistives Safety Edges 8K2 or
Mechanicals Safety Edges
(Choose in transmitter options)
Resistives Safety Edges 8K2 or
Mechanicals Safety Edges
(Choose in transmitter options)
Resistives Safety Edges 8K2 or
Mechanicals Safety Edges
(Choose in transmitter options)
Radio transmission system for resistive safety edges. The system consists of a transmitter unit and a receiver unit.
Important:
- Insert battery 1 first and then battery 2! Unless this order is observed, correct function is not guaranteed.
GB
M
Safety Edge
Safety Edge
Pedestrian
Door
2.1 INDUSTRIAL SECTIONAL DOOR (1 TRANSMITTER 2 CHANNELS)
2.2 SLIDING DOOR (TRANSMITTER 1 CHANNEL 1, TRANSMITTER 2 CHANNEL 2)
Motor
Motor
Wirelessband
Receiver
Wireless
Communication
Wireless
Communication
Wirelessband
Transmitter 1
Wirelessband
Transmitter
Wirelessband
Receiver
Wirelessband
Transmitter 2
M
Contact
(Pedestrian door)
1
1
2
2
3
3
4
4
ON
ON
5
5
RECEIVER OPTION 5 (OFF)
RECEIVER OPTION 5 (ON)
1 - 4
21/10/13
(WIRELESSBAND 1.3 SLIM)
1 2
1 2
TRANSMITTER 1
TRANSMITTER 1
TRANSMITTER 2
Input 1
Common
Input 1
Common
Resistives Safety Edges 8K2 or
Mechanicals Safety Edges
(Choose in transmitter options)
Resistives Safety Edges 8K2 or
Mechanicals Safety Edges
(Choose in transmitter options)
Resistives Safety Edges 8K2 or
Mechanicals Safety Edges
(Choose in transmitter options)
Contact
(Pedestrian door)
1 2 3 4
Input 1
Common
Common
Input 2
WIRELESSBAND 1.3 SLIM

AERF WIRELESSBAND 1.3 SLIM Specifications

General

Brand	AERF
Model	WIRELESSBAND 1.3 SLIM
Category	Receiver
Language	English

Summary

General Information

Transmitter Typical Configurations

Industrial Sectional Door Configuration

Configuration for sectional doors using one transmitter and two channels.

Sliding Door Configuration

Configuration for sliding doors using two transmitters on separate channels.

Transmitter Options Selector

Transmitter Options Combination

Safety Edge Input Type Selection N.C. or N.O.

Receiver Details

Receiver Connection Examples

Receiver Output Connections

Receiver LED Indicator

Receiver Options Selector

System Start-Up Procedure

Programming Process

Code Memorization for Two Transmitters

Memory Reset Procedure

Memory Full Indicator

Low Battery Indicator

Technical Specifications

CE Declaration of Conformity

Important Safety Warning