Aerfast MEC-AIR Series User Manual

Operating Manual
Mode d’Emploi
Betriebsanleitung
Gebruikaanwijzing
Bruksanvisning
Käyttöohjeet ja osalista
Air Compressor, oil-less type
Compresseur d’air, modele sans huile
Kompressor, Typ - ölfrei
Compressor, Olieloos type
Luftkompressor, oljefritt utförande
Kompressorit, öljytön
AC33024
GB .................
FR .................
DE ...............
NL ...............
SE ...............
SF ................
2
9
16
23
30
37
AC33024
Warnings for the safe use of this compressor are
included in this manual
Read and understand this manual
TRANSLATION OF THE ORIGINAL MANUAL
TRADUCTION DE LA NOTICE ORIGINALE
12/02/2015

Aerfast MEC-AIR Series Specifications

General

Series	MEC-AIR
Power Source	Electric
Voltage	230V
Motor Power	1.5 HP
Type	Portable Air Compressor
Max Pressure	8 Bar / 116 PSI
Tank Capacity	24 L

Summary

PRODUCT OVERVIEW AND SPECIFICATIONS

Component Identification

Lists and identifies the main components of the air compressor.

Technical Data Sheet

Provides key technical specifications like power, pressure, and dimensions.

CE Marking and Compliance

Certifies compliance with Machinery Directive and noise directive.

MANUAL USAGE AND PRESERVATION

Manual Usage and Preservation

Emphasizes reading, understanding, and keeping the manual for safety.

USER RESPONSIBILITIES AND GUIDELINES

Authorized Operators and Competencies

Defines roles like Charged Operator, Maintenance Engineer, Safety Manager.

Machine Shutdown for Maintenance

Details draining tank, disconnecting power, and verifying shutdown.

Warranty Terms and Conditions

Covers warranty duration, validity, expiration, and manufacturer liability.

Intended Use and Operating Environment

Specifies industrial/craft use, indoor/outdoor conditions, and safety precautions.

Prohibited Uses and Safety

Forbids uses other than intended to ensure safety and efficiency.

MACHINE HANDLING AND STORAGE

Transport and Handling Procedures

Details manual transport by two operators or one, emphasizing ergonomic risks.

Packaging and Unpacking

Machine packed in cardboard, unpack on stable surface, dispose packaging as per law.

Machine Placement and Stability

Position on an even floor, ensure stability, maintain 1m distance from obstructions.

Long-Term Storage Recommendations

Store in a safe place, with proper temperature/humidity, protect from dust, drain condensate.

ELECTRICAL AND AIR CONNECTIONS

Electrical Connection Requirements

Connect to a compliant mains outlet with proper earthing and CE-marked electrical material.

Air Tube and Tool Connections

Connect tool to air tube, air tube to outlet tap; use suitable accessories.

SAFETY DEVICES AND MARKINGS

Safety Device Overview

Details safety valve, pressure switch, fan guard, thermal switch, and gauges.

Safety Symbols and Maintenance

Explains hazard, warning, and instruction symbols; keep signals clean and replace if worn.

OPERATION AND MAINTENANCE PREPARATION

Required Personal Protective Equipment (PPE)

Specifies mandatory PPE like hand, hearing, and foot protection for various tasks.

Potential Residual Risks and Mitigation

Identifies risk of burns from hot parts and measures to mitigate them.

Control Device Identification

Identifies power supply, switches, regulators, and gauges via diagram.

Pre-Operation Safety Checks

Lists checks for authorized personnel, safety devices, positioning, switches, and manual understanding.

Machine Startup Procedure

Details switching on after checks, understanding the manual, and avoiding unattended operation.

OPERATIONAL PROCEDURES AND INTERRUPTIONS

Machine Startup Procedure

Connects to mains, starts switch, adjusts pressure, connects tool.

Machine Shutdown Procedure

Steps to turn off the switch, disconnect power, air tube, and drain condensate.

Thermal Protection Reset

Procedure to reset the thermal switch after overload or short-circuit.

Emergency Stop and Restart

How to stop in emergency, inform manager, and restart safely.

Routine Maintenance Activities

Covers activities for proper use and operation, performed by authorized technicians.

MAINTENANCE AND TROUBLESHOOTING

Supplementary Maintenance Assistance

Details interventions by manufacturer technicians for adjustments, replacements, or failures.

Machine Demolition Procedure

Compulsorily observe regulations, separate parts by material during demolition.

Obtaining Original Spare Parts

Original spare parts must be requested exclusively from the manufacturer or dealer.

Troubleshooting Common Issues

Table of common problems, their causes, and troubleshooting steps.