Need help?Do you have a question about the Aerial FREERIDE BIMINI and is the answer not in the manual?
General| Type | Bimini Top |
|---|---|
| Material | Polyester |
| UV Protection | Yes |
| Water Resistance | Yes |
| Color Options | Black, Gray |
Important safety notice against trailering the boat with the bimini canopy attached to prevent damage and warranty voiding.
Detailed list of all components included in the Freeride Bimini kit with quantities specified for assembly.
Visual diagram showing how all parts of the Freeride Bimini fit together before final assembly.
Assemble the main frame sections by connecting tubes until they click into place.
Install the canvas onto the frame, ensuring it is drum-tight and zippers are aligned.
Attach support poles and adjust them to the correct position using provided hardware.
Connect the frame pieces using clamps and bolts, ensuring a secure fit.
Measure the required width at the mounting points on the boat tower.
Adjust the bimini frame to match the measured width at the boat tower mounting points.
Insert and initially install the bimini onto the boat's mounting points.
Raise and finalize the installation of the bimini canopy onto the boat.
Adjust clamp positions to set the desired tilt angle for the bimini canopy.
To Next Page