13
Prg
Esc
Prg
Esc
Note:
Weekly time programming: In this window it is possible to set time, date and
day of the week.
Enable weekly timer: enabling of the plant’s weekly programming
Status timer On/Off: indicates if the plant is switched on or off by the
weekly time programming. When programming is disabled the status is
always On.
Note:
Day: selects the day of the week for which the time period is to be
set.
Start1 : plant switch-on time for the first period
Stop 1: plant switch-off time for the first period
Start 2 : plant switch-on time for the second period
Stop 2 : plant switch-off time for the second period
To Next Page
Loading...
