To Next PageTo Next Page
Need help?Do you have a question about the AERMEC NRA F 700 A and is the answer not in the manual?
Critical safety and operational warnings for installation and use.
Overview of the microprocessor's functions and capabilities.
Performance metrics for the unit in cooling mode.
Performance metrics for the unit in free-cooling mode.
Key general technical specifications of the unit.
Electrical data including current absorption and power.
Step-by-step calculation for unit selection based on project data.
Comparison of energy efficiency with and without free-cooling.
Graphical representation of operating limits in cooling mode.
Graph for calculating absorbed power correction coefficients.
Graph for calculating cooling capacity correction coefficients.
Graph for cooling capacity correction for low noise models.
Graph for absorbed power correction for low noise models.
Graph for calculating cooling capacity correction in free-cooling mode.
Graphs showing water pressure drops without free-cooling.
Graphs showing water pressure drops with free-cooling.
Tables for correcting performance based on glycol and delta T.
Graphs for correcting power based on glycol presence.
Graphs for correcting pressure drop and flow rate with glycol.
Graph showing useful head for units without free-cooling.
Graph showing useful head for units with free-cooling.
Guidelines for safe unit movement and lifting operations.
Essential checks before powering on the unit.
Steps for safely starting the unit for operation.
Procedures for filling/draining the system and preventing freezing.
Specific precautions for using R407C refrigerant.
Instructions for making electrical connections to the unit.
General