To Next PageTo Next Page
Need help?Do you have a question about the AERMEC NRA F 350 and is the answer not in the manual?
Explains the unit's operating modes: Free-Cooling Only, Mixed Free-Cooling + Compressors, and Compressors Only.
Details available unit versions: Standard, High Temperature, and Low Noise.
Provides critical warnings and instructions for installation and initial operation.
Explains how to select a unit by compiling the commercial code and lists main restrictions.
Details configurator fields for selecting unit model, size, version, coils, evaporator, power supply, and storage tank.
Covers flow switch, antifreeze heater, and pressure sensors for unit safety and control.
Introduces graphs and tables used for unit selection based on performance and operating conditions.
Provides a detailed example of unit selection considering summer/winter conditions and glycol use.
Presents cooling capacity and input power data for free-cooling mode.
Lists sound pressure and power levels in dB(A) for chiller mode across different frequency bands.
Presents sound pressure and power levels in dB(A) for free-cooling mode.
Provides instructions for unit delivery, handling, and safe lifting procedures.
Specifies requirements for unit installation location and ensuring a level surface.
Checks to perform before unit start-up: charge, air bleed, electrical connections, and voltage.
Specific precautions for handling and maintenance of units using R407C refrigerant.
Explains safety symbols indicating danger types: voltage, high temperature, moving parts.
Electronic board schematic showing connections for various inputs, outputs, and sensors.
Electronic board schematic for units with storage tank, showing connections and terminals.
Explains the unit's operating modes: Free-Cooling Only, Mixed Free-Cooling + Compressors, and Compressors Only.
Details available unit versions: Standard, High Temperature, and Low Noise.
Provides critical warnings and instructions for installation and initial operation.
Explains how to select a unit by compiling the commercial code and lists main restrictions.
Details configurator fields for selecting unit model, size, version, coils, evaporator, power supply, and storage tank.
Covers flow switch, antifreeze heater, and pressure sensors for unit safety and control.
Introduces graphs and tables used for unit selection based on performance and operating conditions.
Provides a detailed example of unit selection considering summer/winter conditions and glycol use.
Presents cooling capacity and input power data for free-cooling mode.
Lists sound pressure and power levels in dB(A) for chiller mode across different frequency bands.
Presents sound pressure and power levels in dB(A) for free-cooling mode.
Provides instructions for unit delivery, handling, and safe lifting procedures.
Specifies requirements for unit installation location and ensuring a level surface.
Checks to perform before unit start-up: charge, air bleed, electrical connections, and voltage.
Specific precautions for handling and maintenance of units using R407C refrigerant.
Explains safety symbols indicating danger types: voltage, high temperature, moving parts.
Electronic board schematic showing connections for various inputs, outputs, and sensors.
Electronic board schematic for units with storage tank, showing connections and terminals.
General