To Next PageTo Next Page
Need help?Do you have a question about the AERMEC NRL 0500 and is the answer not in the manual?
General| Model | NRL 0500 |
|---|---|
| Category | Chiller |
| Refrigerant | R410A |
| Cooling Capacity | 500 kW |
| Power Supply | 400V/3Ph/50Hz |
| Sound Power Level | 85 dB(A) |
| Operating Temperature Range | -10°C to +45°C |
Guidelines for choosing the installation location and required spaces.
Preparatory steps before commissioning the unit.
Procedure for starting up the unit with no voltage present.
Checks and procedures for the hydraulic circuit during start-up.
Final steps for commissioning the unit after initial checks.
Checks to perform while the machine is running.
Checks for the cooling circuit during operation.
General warnings and precautions for maintenance tasks.
Safety precautions to follow during maintenance.
Mitigating risks like mechanical, electrical, and chemical hazards.
Safety measures for chemical, fire, and environmental hazards.
Preventing risks from pressure or temperature extremes.
Important safety notes for measurements and testing.
Routine checks covering leaks, power supply, valves, and fans.
Maintenance tasks for the cooling circuit under full load.
Checks related to the compressor's functioning and oil.
Checks for pumps, heat exchangers, and flow switches.
General checks for units with centrifugal compressors.
Electrical checks for units with centrifugal compressors.
Procedures for decommissioning and environmentally sound disposal.
