AeroBed V36274 - User Manual

INFLATION & ADJUSTMENTS
For better protection of this product never fold, unfold or inflate the airbed in temperatures
below freezing, avoid extensive exposure to the sun and protect from contact with sharp
objects and rough ground.
1. Place your rolled-up bed on the floor or other surface free of obstructions or sharp objects.
2. Make certain the Quick Air Release Valve is closed. If the release valve is open, close it by
using 2 thumbs to push cover and snap into valve. Be careful to avoid pushing valve cover
to the right or left as it snaps into the valve opening.
3. Remove the AC plug and cord from the plastic bag and shrink wrap.
4.
Before plugging the pump into the outlet, please confirm that the knob is in the “OFF” position.
5. Plug into any standard polarized 120 Volt AC electrical outlet. North American Electrical
rating: 120 VAC 60 Hz 1.7 A.
(Note: 230 VAC product sold outside of North America).
This product has a polarized attachment plug (one blade
is wider than the other) as a safety feature. This plug will
fit into a polarized outlet only one way. If the plug does not
fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Never use with an extension
cord unless the plug can be fully inserted. Do not attempt
to defeat this safety feature.
6. Select the desired firmness by rotating the knob on the pump to SOFT, MEDIUM, or FIRM.
The light next to the chosen setting will be illuminated to confirm successful selection.
The pump will inflate the mattress to the selected firmness setting and then shut off
automatically.
7. Once the desired firmness is reached, the pump will monitor mattress pressure and
quietly add air if the firmness drops below the selected setting. The mattress firmness is
maintained when the Comfort Lock light is illuminated. The product must remain plugged
into the electrical outlet for this feature to remain active throughout the night.
8. To change the firmness of your mattress, simply rotate the knob to the new desired
setting. The pump will immediately adjust the firmness to the new setting and maintain
that selected firmness throughout the night.
9. This product is designed to be used overnight to maintain the mattress at the selected
firmness setting. It is not designed to be in operation for extended periods of time. When
the bed is not in use, please turn the knob to the OFF setting and unplug the power cord
from the electrical outlet. This is a temporary bedding solution and is not intended for
everyday use.
USB CHARGING PORT
1. Your AeroBed
®
product includes a USB port built into the pump for charging your personal
device. Please adhere to the following guidelines to ensure proper usage.
2. In order to charge your personal device using the included USB port, the pump must
remain plugged into the electrical outlet.
3. Ensure that your charging cable is securely connected to the USB port on the pump and
also to the charging port of the mobile device.
4. Once your device is fully charged, please disconnect the charging cable from the USB port.
AUTOMATIC DEFLATION AND STORAGE
1. To deflate the mattress, simply rotate the knob to the DEFLATE position. The pump will immediately
begin to expel air and will automatically stop when the mattress is completely deflated.
2. For faster deflation, open the Quick Release Valve and allow air to expel. Then, for more
compact storage, close the valve and place the knob into the DEFLATE position. The pump
will expel the remaining air and will shut off automatically when the mattress is deflated.
3. Fold the sides of the bed into the center along its length. Open Quick Release Valve and
tightly roll the bed, pushing any remaining air out, close Quick Release Valve and place the
bed in the convenient carry bag for easy transport and storage.
4. Store your bed in a clean, dry place at room temperature (above 50 °F/10 °C). Storing your
bed under 50 °F (10 °C)
and over 100 °F (38 °C)
may affect its performance
and will not be covered
under warranty.
INSTRUCTION MANUAL
CL1000/RDV
Thank you for joining the AeroBed
®
family by purchasing one of our products. You can expect top-notch quality, innovation and imagination from every AeroBed
®
product. You are about to enjoy
the comfort of an AeroBed
®
product. It is your responsibility to read and always follow the safety, care and maintenance instructions for your new AeroBed
®
product. This is a temporary bedding
solution and not intended for everyday use. Always instruct and supervise others on your bed’s proper use, maintenance and safety.
IMPORTANT SAFETY
INSTRUCTIONS AND WARNINGS
SAVE THESE INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
BEFORE USING THIS PRODUCT.
When using an electrical furnishing, basic precautions should always be followed.
Read all of the following instructions before using this furnishing.
To reduce the risk of electric shock always unplug this furnishing from the electrical outlet
before cleaning.
When using an electrical furnishing, basic precautions should always be followed, including
the following: Read all instructions before using (this furnishing).
DANGER
• Productisforindooruseonly.Donotuseoutdoors.ForHousehold/ResidentialUseOnly.
• Thisproducthasnotbeenevaluatedforammabilityorcigaretteignitionresistance.
WARNING
• Useonatsurfacesonly.Bedmaytipoveronunevensurfaces.
• Removeallsharpobjectsfromareawherebedwillbesetupandused.Donotusethis
bed on abrasive surfaces or near pointed/sharp items or surfaces. Bed may puncture.
• Unplugproductwhennotinuse.
• Pumpisnotintendedforextendedperiodsofuselongerthan8hours.Pumpmaystop
working or overheat if it is used for extended periods of time.
• Donotattempttodisassemble,repair,orservicethepump.Noserviceablepartsarecontained
inside. Contact The Coleman Company, Inc. at 3600 North Hydraulic, Wichita, KS 67219,
1-800-835-3278 or TDD 1-316-832-8707 in the United States or Sunbeam Corporation
(Canada) Limited, DBA Jarden Consumer Solutions at 20B Hereford Street, Brampton ON L6Y
0M1, 1-800-387-6161 in Canada for repair and service center information.
WARNING
To reduce the risk of burns, fire, electric shock, or injury to persons:
• Unplugpumpbeforeputtingonortakingoffparts.
• Closesupervisionisnecessarywhenthisfurnishingisusednearchildrenordisabledpersons.
• Usethisfurnishingonlyforitsintendeduseasdescribedintheseinstructions.Donot
use attachments not recommended by the manufacturer.
• Neveroperatethisfurnishingiftheplugorcardhasbeendamaged,ifitisnotworking
properly, if it has been dropped or damaged, or dropped into water. Contact the
manufacturer for assistance in these matters.
• Keepthecordawayfromheatedsurfaces.
• Neveroperatethefurnishingwiththeairopeningsblocked.Keeptheairopeningsfree
of lint, hair, and the like.
• Neverdroporinsertanyobjectintoanyopening.
• Donotuseoutdoors.
• Donotoperatewhereaerosolsprayproductsarebeingusedorwhereoxygenisadministered.
• Todisconnect,placetheknobintheOFFposition,thenremoveplugfromoutlet.
• Warning-RiskofinjurytoPersons-donotusethisfurnishingtosupportvideo
equipment such as televisions or computer monitors.
•Thispumpincludesamechanismtoprotectagainsthightemperatures.Whenthe
primary pump runs for an extended period of time, it will automatically shut off to
avoid overheating. Allow the pump 30 minutes to cool down before next use.
• Maximumloadsareasfollows:Queen(600lbs-272Kg),Full(600lbs-272Kg),Twin
(300lbs - 136Kg).
SAVE THESE INSTRUCTIONS
WARNING
This is the closed position. Open Air Release Valve. Close Valve using 2 thumbs.
SERVICING OF DOUBLE-INSULATED PRODUCTS
In a double-insulated product, two systems of insulation are provided instead of grounding.
No grounding means is provided on a double-insulated product, nor is a means for grounding
to be added to the product. Servicing a double-insulated product requires extreme care and
knowledge of the system, and is to be done only by qualified service personnel. Replacement
parts for a double-insulated product must be identical to the parts they replace.

Summary

Important Safety Instructions and Warnings

Servicing Double-Insulated Products

Details on servicing double-insulated products requiring careful knowledge and qualified personnel.

Inflation and Adjustments

Select Firmness and Inflation

How to select desired firmness, inflation process, and automatic pressure monitoring.

Adjusting Firmness Overnight

Instructions for changing mattress firmness during use and maintaining it.

USB Charging Port

Charging Your Device

Guidelines for using the built-in USB port to charge personal devices.

Automatic Deflation and Storage

Deflation Process

Steps for deflating the mattress using the pump and quick release valve.

Storage Instructions

How to fold, roll, and store the bed properly for transport and storage.

Care and Maintenance

General Care Instructions

Advice on inspecting, protecting, and storing the bed to prevent damage and maintain warranty.

Cleaning Procedures

Guidelines for cleaning the plush surface and PVC parts, emphasizing unplugging the unit first.

FCC Information

Limited Express Warranty

Warranty Exclusions

Conditions under which the product warranty is voided, including misuse or alteration.

Warranty Redemptions

Process for obtaining authorization before returning a defective product for repair or replacement.

Warranty Disclaimer

Statements limiting implied warranties and the duration for bringing claims against the seller.

Limitation of Liability

Caps on seller's liability for indirect, incidental, or consequential damages related to product use.

Overview

1. Function Description
2. Usage Features
3. Maintenance Features

This document describes the AeroBed® inflatable mattress, a temporary bedding solution designed for indoor use. It emphasizes safety, proper usage, and maintenance to ensure user comfort and product longevity.

Function Description

The AeroBed® is an inflatable mattress equipped with an integrated pump for inflation and deflation. It offers adjustable firmness settings (SOFT, MEDIUM, FIRM) and a Comfort Lock feature that automatically monitors and maintains the selected mattress pressure throughout the night by quietly adding air as needed. The product is designed to provide a comfortable sleeping surface for temporary use, not as an everyday bed. It also includes a USB charging port integrated into the pump, allowing users to charge personal devices while the mattress is plugged into an electrical outlet. The pump mechanism includes a safety feature that automatically shuts off if it runs for an extended period to prevent overheating, requiring a 30-minute cool-down before subsequent use.

Usage Features

To use the AeroBed®, first ensure the Quick Air Release Valve is closed by pushing its cover and snapping it into the valve opening. The mattress should be placed on a flat surface free of obstructions, sharp objects, or abrasive materials to prevent punctures. After removing the AC plug and cord from its packaging, confirm the pump knob is in the "OFF" position before plugging it into a standard polarized 120 Volt AC electrical outlet. The product features a polarized plug (one blade wider than the other) for safety; if it doesn't fit, reverse the plug. Once plugged in, users can select their desired firmness by rotating the knob to SOFT, MEDIUM, or FIRM. An illuminated light next to the chosen setting confirms selection, and the pump will automatically inflate the mattress to that firmness. The Comfort Lock feature then activates, maintaining the firmness as long as the mattress remains plugged in. To change firmness, simply rotate the knob to a new setting, and the pump will adjust accordingly. For deflation, rotate the knob to the DEFLATE position. The pump will automatically expel air until the mattress is completely deflated. For faster or more compact deflation, the Quick Air Release Valve can be opened to allow air to escape, then closed before rotating the knob to DEFLATE again to remove remaining air. After deflation, the mattress should be folded lengthwise, rolled tightly to expel any residual air, and stored in its carry bag. The integrated USB port allows for charging personal devices when the pump is plugged into an electrical outlet. Users must ensure their charging cable is securely connected to both the USB port and their mobile device, disconnecting it once charging is complete.

Maintenance Features

For maintenance, the AeroBed® should always be unplugged from the electrical outlet before cleaning to reduce the risk of electric shock. The plush surface of the mattress should not get wet, as repeated exposure to water or other liquids can cause damage not covered by the warranty. If liquid contacts the plush surface, it should be blotted dry, and any stains removed with a damp cloth, allowing the surface to air dry completely. The PVC sides and bottom of the bed can be cleaned with a mild dishwashing detergent or household cleaner; strong chemicals or compounds should be avoided. After cleaning, the bed must be allowed to air dry completely before storing. The mattress should be stored in a clean, dry place at room temperature, specifically above 50 °F (10 °C) and below 100 °F (38 °C), as extreme temperatures can affect performance and void the warranty. It is crucial to inspect the bed prior to each use and keep it away from sharp objects to prevent cuts or snags, which may not be repairable or covered by the warranty. The pump is not designed for user disassembly, repair, or service; any issues should be directed to the manufacturer's customer service. The product should not be stored folded inside sofa beds or roll-aways, as this can cause damage and void the warranty. For double-insulated products like this one, servicing requires specialized knowledge and should only be performed by qualified personnel using identical replacement parts.

AeroBed V36274 Specifications

General

Product Name	AeroBed V36274
Category	Indoor Furnishing
Type	Air Mattress
Mattress Size	Queen
Inflated Dimensions	78 x 60 x 18 inches
Weight Capacity	600 lbs
Pump Type	Built-in electric pump
Power Source	120V AC
Material	PVC with flocked top
Height	18 inches
Carry Bag Included	Yes
Inflation Time	3 minutes
Warranty	1 year limited warranty