26
PROGRAMS (cont’d)
can be also be made by using the
0
1
2
3
4 5
6
7
8
9
buttons. For details, refer to Express buttons in
this manual.
Your workout will end when the
button has been pressed. Stor will appear in the RESULTS display window, indicating that
you have successfully recorded your custom program. Do not end your workout by removing the safety magnetic or your program
will not be recorded.
Note: The current distance will be displayed the RESULTS display window. To lock onto distance, calories, or Aerobic Points, press the
SELECT
button. An LED light will be illuminated next to the data currently appearing in the RESULTS display window. To scan your
workout results while exercising, press and hold the
SELECT
button until the word S(An appears in the RESULTS display window.
Each value will be displayed for 3 seconds.
NOTE: You will see a graphic depiction of the Time Spent in Zone in the PROFILE display window, if you were wearing the wireless chest
strap during your workout.
If a problem should occur, the treadmill can be stopped quickly by pulling on the magnetic safety cord to dislodge the key from the Control
Panel. The treadmill will stop a bit more abruptly, but still gently enough to prevent you from being injured. This is an emergency
procedure only and should not be used as the normal stopping procedure.
To Next Page
Loading...