ISSUE DATE:
PAGE
TITLE: Service & Maintenance Manual
FILE NO.
REVISION
DATE:
SUBTITLE: Model 3400 Amphibious Floats
REVISION
Log of Revisions Page
REV. PAGES
DESCRIPTION DATE
Calendar time added to inspection schedule,
editorial.
Corrected tire ply from 6 to 8 ply rating
Incorporated changes to the lower nose gear
assembly, keel and wear strip installation, main gear
and edited troubleshooting in gear advisory/hydraulic
TH
15-17
Added 35A-45700 Wheel Installation & references
to A-10036 CMM.
Added Ni8U-EM12E-AN6X2-H1141 Sensor to main
gear section.
Added Figures 5.2.10; 5.3; 5.6; 5.7a, 5.7b; .
7/06/09
TH
7
8
9
11
12
12-15
17
23
32-34
38
40, 48
51
69
Added Section 11. Troubleshooting.
Added note Re: K-66 compatibility.
Added 1.1 Availability of this manual.
Added 1.2 Applicable CMM’s
Added 1.3 Dimensions, Locations and
Nomenclature.
Deleted “UHMW Plastic” from Keel Strip
description.
Added Figure 2.1.
Added “(for old style plugs only)”
Added 2.1, 2.2, and 2.3 for Fasteners.
Added Figure 3.1.1.
5.2.11 Expanded Axle Nut Installation.
Added Figures 6.2.1, 6.2.2, 6.2.3, 6.2.4, & 6.2.5.
Added Figure 6.7 to differentiate between old and
new Gear Advisories.
Added Note to define text applicable to only the K-
65 Gear Advisories.
Added 6.8 with illustrations for Spot Mirror.
Added “removal” to Para. 2 & 3.
Changed title of Section 9 from “Continued
Airworthiness Schedule…” to “Recommended
Airworthiness Schedule…”
Added Section 12. Airworthiness Limitations to
comply with 14 CFR Part 23, Appendix G.
T. Hamilton
3179-80
Added new section 8 on installation of floats to
aircraft including weights of remaining components.
Other changes to include 206
Added Appendix with Install drawings for CPL
MHH