GENERAL INFORMATION
13
Specifications
For the latest specifications, see the data sheet included on the CD-ROM (part no. 46886/028)
or go to the Aeroflex website.
All 3020 Series specifications are defined when used in conjunction with the 3010/11 RF
Synthesizer PXI module and driver software supplied with the module.
Warm-up time
Allow twenty minutes for a module to warm up and meet its specifications fully after booting.
Calibration and servicing
The recommended calibration interval is 24 months.
There are no user-serviceable parts in these modules; if any attention is needed, return the
module to your Aeroflex agent.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com