AeroPilates Reformer 651 User Manual

CAUTION:
Weight on this product should not exceed 300 lbs.
Owner's Manual
Product May Vary Slightly From Pictured.
Exercise can present a
health risk. Consult a
physician before beginning
any exercise program with
this equipment. If you feel
faint or dizzy, immediately
discontinue use of this
equipment. Serious bodily
injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur
if all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
securely tightened prior to
each use. Follow all safety
instructions in this manual.
!
WARNING
STAMINA PRODUCTS
MADE IN CHINA
© 2019 Stamina Products, Inc.
2019, 02
United States and/or
International patents apply
and/or are pending. See
www.staminaproducts.com
for details.
When calling for parts or
service, please specify
the following numbers
:
Model#: 55-4651A
S/N: _____________
This Product is Distributed Exclusively by
2040 N Alliance Ave, Springeld, MO 65803
Customer Care
1 (800) 375-7520
www.staminaproducts.com

AeroPilates Reformer 651 Specifications

General

Brand	AeroPilates
Model	Reformer 651
Category	Fitness Equipment
Type	Pilates Reformer
Frame Material	Steel
Max User Weight	300 lbs
Footbar	Adjustable
Headrest	Yes
Color	Black
Resistance Type	Cord
Included Accessories	Rebounder, DVD
Resistance	4 cords

Summary

Safety Instructions

Equipment Warning, Caution & Notice Labels

Stand Caution Label

Caution Label

Pinch Point Caution Label

Hardware Identification Chart

Assembly Instructions

Step 1

Connect rear stand to middle stand using connection bars and pull pins.

Step 2

Remove locking pin and unfold main frame into a 'V' shape.

Step 3

Attach rubber feet to front and rear frames with screws and washers.

Step 4

Unfold the reformer to a flat position by moving the front frame clockwise.

Step 5

Place front cover over front frame and press securely.

Step 6

Insert footbar into front cover and frame, securing with locking knobs.

Step 7

Place rear cover over rear frame and press securely.

Step 8

Insert pulley risers into rear cover and frame, securing with locking knobs.

Step 9

Step 10

Step 11

Operational Instructions

Load Adjustment

Adjust platform resistance by securing tension cords in front frame slots.

Rope Length Adjustment

Customizing Rope Length

Tension Cord Replacement

Platform Roller Replacement

Maintenance

Conditioning Guidelines

Warm-Up and Cool-Down

To Register Your Product

To Order Parts