y
marked on the tool. The employer/user shall contact the manufacturer to obtain replacement marking labels when necessary.
Operating Instruction
Description
Die cast aluminum body, Reversible, Rubber scuff guards on nose and back, Built –in –air regulator varies speed & power, front
exhaust, designed for removing and installing nuts and bolts. Also ideal for tire changing and general assembling work and other
workshop applications.
Projectile hazards
Failure of the workpiece, of accessories or even of the inserted tool itself can generate high-velocity projectiles.
Always wear impact-resistant eye protection during the operation of the assembly power tool for threaded
fasteners. The grade of protection required should be assessed for each use. Ensure that the workpiece is
securely fixed.
Entanglement hazards
scalping and/or lacerations if loose clothing, personal
jewellery, neckware, hair or gloves are not kept away from the tool and accessories.
nd drive extensions can easily entangle rubber-coated or metal-reinforced gloves.
-fitting gloves or gloves with cut or frayed fingers.
Operating hazards
The following apply.
and heat. Wear suitable gloves to protect hands.
Operators and maintenance personnel shall be physically able to handle the bulk, weight and power of the tool.
on torque are requested, it is recommended to use a suspension
arm whenever possible. If that is not possible, side handles are recommended for straightcase and pistol-grip tools.
Reaction bars are recommended for angle nutrunners. In any case, it is recommended to use a means to absorb the
reaction torque above 4 N·m for straight tools, above 10 N·m for pistol-grip tools, and above 60 N·m for angle
nutrunners.
-and-stop device in the case of an interruption of the energy supply.
-ended crow-foot nutrunners.
ing hands between tool and workpiece, especially when
unscrewing.
Repetitive motions hazards
or other parts of the body.
power tool for threaded fasteners, the operator should adopt a comfortable posture
To Next Page