Need help?Do you have a question about the Aeroqual AQM 65 and is the answer not in the manual?
General| Data Logging | Yes |
|---|---|
| Accuracy (Gas Sensors) | ±5% of reading |
| Enclosure Rating | IP65 |
| Parameters Measured | PM2.5, PM10 |
| Connectivity | Wi-Fi, Ethernet |
| Power Supply | Rechargeable battery, 12V DC |
| Data Storage | Internal storage |
| Measurement Range (Gas Sensors) | CO: 0-50 ppm |
| Response Time (Gas Sensors) | <60 seconds |
| Operating Temperature | -10°C to 50°C |
| Operating Humidity | 0-95% RH (non-condensing) |
| Technology | Laser scattering for particulate matter, electrochemical sensors for gases |
Overview of available gas sensors for the AQM 65.
Details on particulate matter measurement modules including Particle Monitor and Profiler.
Explains the internal temperature control system and its importance for performance.
How to access and control the instrument using Aeroqual Connect and Cloud.
Provides essential initial setup and startup instructions for the AQM 65.
Initial steps for receiving and unboxing the AQM 65 instrument.
Crucial steps for basic assembly and first power-on of the AQM 65.
Core procedure for connecting AC power and initiating the AQM 65.
Configuration instructions for the MOXA G3111 HSPA modem for remote access.
First interaction with the AQM 65 interface via Wi-Fi access point.
Understanding various connectivity choices like Wi-Fi and Ethernet.
Overview of the core software applications for instrument management.
Accessing and handling collected data through charts and tables.
Essential tools for instrument upkeep, including service mode and calibration.
Managing access levels for Administrator, Engineer, and User roles.
Critical safety information and precautions for handling the AQM 65.
Importance and types of flow meters for accurate calibration and maintenance.
Procedures for checking and adjusting gas flow rates for accuracy.
Step-by-step guide for replacing filters in Particle Monitor and Profiler modules.
Essential procedures for checking PM systems for leaks.
Instructions for changing the configuration of gas modules.
Maintenance procedures for the TMS, including cleaning and pressure checks.
Guidelines for determining the appropriate calibration schedule.
Recommendations for sourcing calibration gas cylinders and regulators.
Critical safety measures and considerations during calibration procedures.
Step-by-step guide for performing gas module calibration.
Detailed steps for executing the zero calibration process.
Detailed steps for executing the span calibration process.
Factory maintenance and calibration schedule for PM modules.
Procedures and considerations for performing calibration on-site.
Guide to calculating and applying a K factor for data adjustment.
Common problems and solutions for the AQM 65.
Information on the power requirements of the AQM 65.
Guidance on proper installation and commissioning of the AQM 65.
To Next Page
