Aerospace Logic FL20 Series User Manual

FL20X Fuel Level Resistive
Document # S200-FL20X-001
Rev 1.3 12/22/2014
Page 2 of 2
Aerospace Logic Inc.
Tel. 416-628-0725
www.aerospacelogic.com
The Fastest Way To Install And Start Using This Product
NOTE: This product is certified as a primary replacement, new or secondary instrument
only when installation is performed in accordance with the documented instructions and
procedures.
1. Review the Warranty Statement before performing any tasks. Do not remove the
instrument from the sealed package until you agree with the stated terms.
2. If this instrument is to be installed in a certified aircraft, verify that the aircraft
model is listed on the Eligibility List (Canadian registered aircraft) or the
Approved Model List (USA and all other countries).
If it is NOT listed, contact your local authority and obtain the necessary
requirements or approvals before proceeding further.
For all other vehicles, including experimental aircraft continue with Step 3.
3. Follow the Installation Instructions exactly as noted, referring to the Wiring
Diagram as and when required. Note: The installation process has been
optimized based on the sequence of components to be installed. Installing the
product in any other way will, in all likelihood, take longer and be more complex.
Ensure that one of the Intensity Control options has been installed in accordance
with document # S200-DDC-INST.
4. Perform the Instrument Setup using the required data as listed in the Instrument
Setup procedure.
5. Validate that all functions perform as outlined in the Operations Guide.
6. Complete all regulatory documentation, if required.

Aerospace Logic FL20 Series Specifications

General

Brand	Aerospace Logic
Model	FL20 Series
Category	Measuring Instruments
Language	English