Need help?Do you have a question about the AeroVironment EVSE-RS and is the answer not in the manual?
General| Product Type | Residential EV Charger |
|---|---|
| Output Power | 7.2 kW |
| Input Voltage | 240V AC |
| Connector Type | SAE J1772 |
| Mounting Options | Wall-mounted |
| Operating Temperature | -30°C to 50°C |
| Enclosure Rating | NEMA 4 |
| Cable Length | 25 feet |
| Amperage | 30 A |
Explains the purpose of the user guide and the charging dock for electric vehicles.
Details the charging dock's compatibility with electric vehicles and charging standards like SAE J1772.
Lists the key features of the charging dock, such as SAE J1772 compliance and safety certifications.
Provides crucial safety guidelines for using the charging dock and vehicle to prevent injury or death.
Explains the meaning of DANGER, WARNING, and NOTE symbols used throughout the manual.
Alerts users to high voltage hazards and emphasizes installation by a qualified electrician.
Covers electrical shock risks, strangulation hazards for children, and California Proposition 65 warnings.
Details compliance with FCC rules regarding radio frequency interference for the device.
Highlights built-in safety features like ground fault interruption and secure connector design.
Discusses vehicle placement, cable management, and connector safety during charging operation.
Introduces the charging dock's front panel indicators (lights) and operational buttons (START/STOP).
Lists the main components of the charging dock, including the front panel, connector, and cable hanger.
Explains how to verify the status of indicator lights before initiating a charging session.
Describes the procedure for removing the connector from the charging dock.
Explains the process of plugging the connector into the vehicle's charging receptacle.
Describes how the charging process begins automatically after the vehicle is connected.
Indicates the status of the charging dock lights when the charging session is finished.
Explains two methods for temporarily pausing or stopping the charging process.
Details using the STOP/START buttons to pause and resume charging without removing the connector.
Outlines the steps to remove the connector from the vehicle and return it to the charging dock.
Explains the automatic restart feature for interrupted charging cycles due to temporary errors.
Describes the automatic charging resumption after a power outage to avoid grid stress.
Provides instructions for cleaning and maintaining the charging dock module.
Discusses utility rates and how they may affect charging times and costs for electric vehicles.
Troubleshooting steps when the POWER PRESENT indicator light is not illuminated.
Addresses problems with READY TO CHARGE, VEHICLE CHARGING, and TROUBLE indicator lights.
Steps to take if the VEHICLE CONNECTED indicator light does not turn on.
Troubleshooting when the VEHICLE CHARGING indicator light does not turn on.
Explains scenarios for a solid TROUBLE light and basic corrective actions.
Addresses issues related to ambient temperature or external heat sources affecting the dock.
Guides on handling a rapidly blinking TROUBLE light, including troubleshooting steps.
States that the EVSE-RS Plug-in model is not for outdoor use and refers to a separate installation guide.
Lists the technical specifications of the Charging Dock, including dimensions, voltage, and ratings.
Details the warranty terms, coverage period, and conditions for the Charging Dock.
To Next Page
