What to do if the AeroVironment TurboCord has both RED TROUBLE and BLUE STATUS indicators on?
If the AeroVironment Battery Charger's RED TROUBLE indicator and BLUE STATUS indicator are both illuminated, the charger is attempting to resolve an internal error. The charger should return to normal operation within one minute. If the problem continues, further assistance is needed.
How to troubleshoot the AeroVironment TurboCord when the BLUE STATUS Indicator does not illuminate?
If the AeroVironment Battery Charger's BLUE STATUS indicator is not lighting up, it could be due to several reasons: * **No power to the unit:** Check the circuit breaker and other circuit loads. Try a different wall outlet and ensure the charger module is fully inserted into the wall outlet. * **Charge coupler issues:** Inspect the charge coupler. Remove it from the vehicle and reinsert it until it clicks. * **Vehicle state:** Ensure the vehicle's charge timer is set to allow charging. Consult the vehicle owner’s manual for instructions.
Why is the RED TROUBLE indicator blinking rapidly on my AeroVironment Battery Charger?
If the AeroVironment Battery Charger's RED TROUBLE indicator is blinking rapidly, it could be due to: * **Utility fault:** Disconnect and reconnect the charger module from the wall outlet. If the issue persists, have a qualified electrician inspect the wall outlet's ground circuit integrity and repair as needed. * **Overheating:** Inspect the charger module for overheating (hot to the touch). Carefully unplug the charger module from the wall outlet and allow it to cool. Have a qualified electrician inspect the wall outlet and adapter integrity and repair as required.
General| Maximum Output Current | 16A |
|---|---|
| Portability | Portable |
| Charging Level | Level 1, Level 2 |
| Input Voltage | 120V, 240V |
| Operating Temperature | -30°C to 50°C |
| Cable Length | 20 ft |
| Charging Power | 3.8 kW |
| Compatibility | SAE J1772 compliant EVs |
Explains the meaning of DANGER, WARNING, and NOTE symbols used in the guide for safety and information.
Introduces the TurboCord Dual Voltage Charger, its capabilities, and compatibility with electric vehicles.
Illustrates and names the key parts of the TurboCord charger: Charge Module, Adapter Clip, Adapter, and Charge Coupler.
Specifies the necessary wall outlets and circuit requirements for 120V and 208/240V operation.
Explains the meaning of the BLUE STATUS and RED TROUBLE indicator lights on the charge module.
Details how to connect and charge using the 120V mode, including steps and indicator status.
Details how to connect and charge using the 240V mode with the adapter, including steps and indicator status.
Instructions for manually stopping charging and details on the auto-restart feature.
Provides solutions for common errors and difficulties encountered with the charger.
Lists detailed technical specifications of the TurboCord charger, including power, weight, and environmental ratings.
Provides step-by-step instructions for mounting the provided cable hanger.
Details safety precautions related to high voltage hazards and proper charger usage.
Informs about chemical content in the product as per California law.
States compliance with FCC rules and conditions for operation.
Outlines built-in safety features like ground check and thermal protection.
Details the terms and conditions of the product's limited warranty.
To Next Page
