AERTECNICA TUBO ROBO TR900L User Manual (English)

Questions and Answers:

K
Katherine SandersAug 13, 2025
What to do if my AERTECNICA TUBO ROBO TR900L Vacuum Cleaner TUBÒ ROBÒ blocks during cleaning?
- M
  Michelle AllisonAug 13, 2025
  If your AERTECNICA TUBÒ ROBÒ blocks during cleaning, several issues could be the cause. First, check the edge-sweeping side brushes and the main brush for any filaments or objects blocking their rotation. Next, ensure the anti-fall, side, and front sensors are free from dust or debris. Additionally, make sure the front collision guard isn't jammed by striking it repeatedly to remove any obstructions. Finally, clear the side wheels from any dust or debris, and ensure they turn freely by pushing them in and out.
L
Luis BurnsAug 16, 2025
Why AERTECNICA TUBO ROBO TR900L ROBÒ does not return to its base?
- K
  Kelly HamiltonAug 16, 2025
  If your AERTECNICA Vacuum Cleaner ROBÒ doesn't return to its base, there are several possible reasons. First, check the power supply connection to ensure the charging dock is powered. If the dock is powered, inspect the communication sensor of the charging dock and the ROBÒ itself, and clear them from any dust or debris.
J
Juan NicholsAug 20, 2025
How to fix AERTECNICA TUBO ROBO TR900L TUBÒ ROBÒ when it does not wash the floors?
- C
  Corey HarrisAug 20, 2025
  If your AERTECNICA Vacuum Cleaner TUBÒ ROBÒ does not wash the floors, start by checking the water level in the tank to ensure it's sufficient. Then, inspect the micro-fibre cloth for wear; if it's worn, replace it to ensure even water distribution. Finally, check the floor mop tank for limescale residues; if present, either replace the tank or remove the limescale.