To Next Page
J
Jeffery GonzalezAug 21, 2025
How to fix no air intake from all sockets in AERTECNICA TUBO STUDIO TS2 Vacuum Cleaner?
- SSpencer BensonAug 21, 2025
If there is no air intake from all the sockets of your AERTECNICA Vacuum Cleaner, it could be due to the following reasons: * The power supply cable is disconnected. * The 12V socket cable line is not connected or incorrectly connected. * The motor overheated (motor temperature exceeded 80 °C). * The dust container is not correctly hooked. To solve this, connect the power supply cable. Connect the 12V socket cable line or check the wiring. Check if the air exhaust line is free or if the two air exhaust openings are blocked, and wait for the motor to cool down. Rehook the container correctly.
General
