EasyManua.ls Logo

Aerus CENTRA LUX E130L User Manual

Aerus CENTRA LUX E130L
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
FOR HOUSEHOLD USE
READ CAREFULLY FOR PROPER USE AND OPERATION
CENTRAL VACUUM SYSTEM
INSTALLATION GUIDE
Assembled in the USA
Question and Answer IconNeed help?

Do you have a question about the Aerus CENTRA LUX E130L and is the answer not in the manual?

Aerus CENTRA LUX E130L Specifications

General IconGeneral
TypeCentral Vacuum System
Voltage120V
FiltrationHEPA
Warranty10 years
Filtration TypeHEPA
ModelCENTRA LUX E130L
Dirt Capacity4 Gallons (15 Liters)

Summary

Safety and Grounding Instructions

Electrical Installation Safety

General safety tips for electrical appliance installation, including eye protection and wiring.

Grounding Requirements and Warnings

Explains grounding importance, plug type, and risks of improper connection.

Before Installation Planning

Vacuum Inlet Placement Strategy

Guidance on placing vacuum inlets for optimal coverage using hose length.

Closet Installation Procedure

Describes using closets and drilling through floors for hallway inlets.

Inlet Parts and PVC Glue Requirements

Information on inlet kits, components, and the need for PVC glue.

Central Vacuum System Installation

Mounting the Power Unit

Instructions on attaching mounting brackets and hanging the unit.

Piping Placement Options

Illustrates different piping routes for the central vacuum system.

Electrical Requirements

Details the 120-volt, 20 amp grounded circuit needed for the power unit.

T-Splicing Installation Method

Explains the "T-Splicing" method for connecting low-voltage wires.

Installation Techniques and Piping

Looping Installation Method

Describes the "Looping" method for connecting inlet valves in unfinished homes.

Correct Elbow Usage in Piping

Specifies when to use Short 90° elbows and where not to use them.

Piping Fitting Guidelines

Fitting Airflow Direction

Illustrates proper orientation of tees and elbows for airflow.

Inlet Valve Mounting Procedures

Unfinished Home Valve Mounting

Step-by-step guide for mounting valves to studs in unfinished construction.

Existing Home Valve Mounting

Instructions for installing valves in existing walls using pilot holes and saws.

Supervalve and Service Information

Supervalve Wiring Connections

Details connecting power and low voltage wires to the Supervalve unit.

Customer Service and Support

Information on obtaining prompt service and genuine parts from Aerus.

Regulatory Compliance

FCC Declaration Details

Details regulatory compliance, model number, and manufacturer information.