What to do if my Aerus Humidifier power lamp is on but there is no mist output?
If the power lamp is illuminated but no mist is being produced, there are a couple of things you can check: * Ensure the water reservoir is filled with water. * Make sure the security switch is properly tightened.
Why is my Aerus PowerPure 5000 Humidifier mist minimal?
The mist output may be minimal because: 1. There is too much scale in the humidifier base. Clean the transducer. 2. The water level in the water reservoir is low. Refill the water reservoir with fresh, cold tap water.
What to do if my Aerus PowerPure 5000 power lamp is on, but the humidifier does not work?
If the power lamp is on but the humidifier isn't working, it might be due to too much water in the reservoir. To resolve this, drain the humidifier base and water reservoir, tightly close the water reservoir lid, and then restart the unit.
Why does my Aerus PowerPure 5000 make abnormal noise?
Abnormal noise may occur if: * The unit is on an unstable surface. Move it to a stable, flat surface. * There are apertures between the nozzle, lid, and water tank. Dip the nozzle in water and reinsert it into the water reservoir.
How to fix mist coming out from around the nozzle or lid of my Aerus Humidifier?
If mist is escaping from around the nozzle or lid, it's likely that the lid is loose. Remove the lid and firmly reposition it on top of the humidifier.
Why does my Aerus Humidifier have an abnormal smell?
An abnormal smell can occur for two reasons: * If the unit is new, remove the water from the reservoir, open the lid, and let the reservoir air out for 12 hours in a cool location. * If the water is dirty, clean the water reservoir and refill it with cool, clean water.
How to fix Aerus Humidifier if the power lamp is off?
If the power lamp is off, it is likely that the power cord is not plugged in. Plug in the power cord and switch the humidifier on.
General| Brand | Aerus |
|---|---|
| Model | PowerPure 5000 |
| Category | Humidifier |
| Language | English |
To Next Page